New Losi Rock Rey 1/10-scale 2.2-inch rock racer [VIDEO]

0 Dec. 30, 2016, 11:25 a.m.

By Aaron Waldron
LiveRC.com

New from Losi:
www.losi.com

ROCK REY™ 1/10-SCALE ROCK RACER
Yellow - #LOS03009T1
Blue - #LOS03009T2
$450

The 1/10th 2.2 Rock Rey™ Rock Racer is incredibly versatile. Not only can it take on rocks with ease, this monster can bash over pretty much anything, anywhere. Through mud and water—at staggering speeds over 40 MPH.* Based on the Losi® Baja Rey™ platform, it features a new roll cage and bodywork that looks just like the full-scale vehicles. From rocks to water to mud, you'll experience next-level awesomeness, drive after drive.

*With compatible 3S LiPo battery, sold separately.

Features:

Realistic 4WD Chassis with Long-Travel Suspension

The Rock Rey chassis is a brilliant blend of scale realism with functional 4WD capabilities. The foundation consists of a 3mm, anodized aluminum chassis plate that is integrated with a realistic roll cage made of super-tough composite material. To this it adds a long-travel, independent front suspension and 4-link live rear axle that look and function exactly like their fullscale counterparts.

LED Light Bar

Twelve brilliant LEDs on the light bar cast more than enough light for running at night without placing a huge current demand on the battery

Dynamite® 2800Kv Brushless Power System

The vehicle comes equipped with a Dynamite Fuze™ 2800Kv brushless motor and a waterproof 130A ESC. This potent combination can handle 2S or 3S LiPo batteries (sold separately) and will allow you to hurtle across the landscape at speeds of up to 40+ mph.

Sealed, Heavy Duty Metal-Gear Transmission and Diffs

The transmission, as well as the front and center diffs, are sealed against the elements and engineered to handle the abuse of a high-output brushless motor and punishing terrain. MOD 1 gears further increase the durability of this off-road beast.

Coil-Over Oil-Filled Shocks

The long-travel shocks do a fantastic job of soaking up the energy from big bumps and jumps. They also feature threaded shock bodies with adjustment collars so you can fine tune the pre-load settings of the coil-over springs. External bump stops on the rear provide plush landings on the hardest surfaces.

Waterproof Electronics

The receiver, servo and ESC are all waterproof so you can run anytime, rain or shine.

Easy-Access Motor

The motor can quickly be accessed for gear changes and servicing simply by removing three screws in the bottom of the chassis.

Easy-Access Battery Compartment

A convenient battery door in the back of the chassis makes it easy to swap batteries without having to remove the body or wrestle with battery straps.

Bolt-On Body Panels and Detailed Interior

The bolt-on body panels are incredibly durable and eliminate the need for body posts that might spoil the scale looks. You also get a molded interior that includes a driver and rider figure, both of which sport racing helmet and harness details.

The Full-Throttle Freedom of AVC® Technology

When you’re ready to let the brushless motor off the chain, don't hold back. The receiver's built-in AVC (Active Vehicle Control®) system will work behind the scenes, making hundreds of tiny throttle and steering adjustments per second, so more of the motor's power is translated into ballistic speed and acceleration instead of just flying dirt. An AVC adjustment knob on the included DX2E transmitter lets you adjust how much traction control the system provides. You can even turn it off.

Product Specifications
Type: Off-Road Desert Truck
Scale: 1/10
Length: 20.75 in (527mm)
Width: 12.75 in (323.8mm)
Height: 8.75 in (222.3mm)
Ground Clearance: 2.2 in (55.9mm) at rear diff
Wheelbase: 15.0 in (381mm)
Weight: 6.55 lb (3.0kg)
Chassis: 3.5mm Plate, 6061-T6 Aluminum
Suspension: Independent Front/4-Link Rear
Drivetrain: 4wd (locked rear, gear diff front and rear)
Tire Type: Maxxis Creeper Crawler LT
Motor or Engine: 550 6-Pole 2800kv Non-Sensored Brushless
Speed Control: Dynamite 130 Amp WP
Radio: Spektrum DX2E 2.4GHz
Servos: Included
Batteries: 2S 5000mah 30C Li-Po with EC3™ Connectors
Charger: Not Included
Gear Pitch: 1.0 Module
Kit/RTR: RTR
Shock Type: Oil-Filled/Coil-Over Spring
Body: Screened, Polycarbonate
Ball Bearings: Yes

Needed to Complete

Requires a 7.4 5000mAh 2S 30C LiPo hardcase battery with EC3™ connector or 11.1 5000mAh 3S 50C LiPo hardcase battery with EC3™ connector and a charger designed to charge 2S and/or 3S Li-Po batteries.